← Back
Editing: Tidy.pod
=head1 NAME Perl::Tidy - Parses and beautifies perl source =head1 SYNOPSIS use Perl::Tidy; my $error_flag = Perl::Tidy::perltidy( source => $source, destination => $destination, stderr => $stderr, argv => $argv, perltidyrc => $perltidyrc, logfile => $logfile, errorfile => $errorfile, teefile => $teefile, debugfile => $debugfile, formatter => $formatter, # callback object (see below) dump_options => $dump_options, dump_options_type => $dump_options_type, prefilter => $prefilter_coderef, postfilter => $postfilter_coderef, ); =head1 DESCRIPTION This module makes the functionality of the perltidy utility available to perl scripts. Any or all of the input parameters may be omitted, in which case the @ARGV array will be used to provide input parameters as described in the perltidy(1) man page. For example, the perltidy script is basically just this: use Perl::Tidy; Perl::Tidy::perltidy(); The call to B<perltidy> returns a scalar B<$error_flag> which is TRUE if an error caused premature termination, and FALSE if the process ran to normal completion. Additional discuss of errors is contained below in the L<ERROR HANDLING|"ERROR HANDLING"> section. The module accepts input and output streams by a variety of methods. The following list of parameters may be any of the following: a filename, an ARRAY reference, a SCALAR reference, or an object with either a B<getline> or B<print> method, as appropriate. source - the source of the script to be formatted destination - the destination of the formatted output stderr - standard error output perltidyrc - the .perltidyrc file logfile - the .LOG file stream, if any errorfile - the .ERR file stream, if any dump_options - ref to a hash to receive parameters (see below), dump_options_type - controls contents of dump_options dump_getopt_flags - ref to a hash to receive Getopt flags dump_options_category - ref to a hash giving category of options dump_abbreviations - ref to a hash giving all abbreviations The following chart illustrates the logic used to decide how to treat a parameter. ref($param) $param is assumed to be: ----------- --------------------- undef a filename SCALAR ref to string ARRAY ref to array (other) object with getline (if source) or print method If the parameter is an object, and the object has a B<close> method, that close method will be called at the end of the stream. =over 4 =item B<source> If the B<source> parameter is given, it defines the source of the input stream. If an input stream is defined with the B<source> parameter then no other source filenames may be specified in the @ARGV array or B<argv> parameter. =item B<destination> If the B<destination> parameter is given, it will be used to define the file or memory location to receive output of perltidy. B<Important note if destination is a string or array reference>. Perl strings of characters which are decoded as utf8 by Perl::Tidy can be returned in either of two possible states, decoded or encoded, and it is important that the calling program and Perl::Tidy are in agreement regarding the state to be returned. A flag B<--encode-output-strings>, or simply B<-eos>, was added in Perl::Tidy version 20220217 for this purpose. =over 4 =item * Use B<-eos> if Perl::Tidy should encode any string which it decodes. This is the current default because it makes perltidy behave well as a filter, and is the correct setting for most programs. But do not use this setting if the calling program will encode the data too, because double encoding will corrupt data. =item * Use B<-neos> if a string should remain decoded if it was decoded by Perl::Tidy. This is only appropriate if the calling program will handle any needed encoding before outputting the string. If needed, this flag can be added to the end of the B<argv> parameter passed to Perl::Tidy. =back For some background information see L<https://github.com/perltidy/perltidy/blob/master/docs/eos_flag.md>. This change in default behavior was made over a period of time as follows: =over 4 =item * For versions before 20220217 the B<-eos> flag was not available and the behavior was equivalent to B<-neos>. =item * In version 20220217 the B<-eos> flag was added but the default remained B<-neos>. =item * For versions after 20220217 the default was set to B<-eos>. =back =item B<stderr> The B<stderr> parameter allows the calling program to redirect the stream that would otherwise go to the standard error output device to any of the stream types listed above. This stream contains important warnings and errors related to the parameters passed to perltidy. =item B<perltidyrc> If the B<perltidyrc> file is given, it will be used instead of any F<.perltidyrc> configuration file that would otherwise be used. =item B<errorfile> The B<errorfile> parameter allows the calling program to capture the stream that would otherwise go to either a .ERR file. This stream contains warnings or errors related to the contents of one source file or stream. The reason that this is different from the stderr stream is that when perltidy is called to process multiple files there will be up to one .ERR file created for each file and it would be very confusing if they were combined. However if perltidy is called to process just a single perl script then it may be more convenient to combine the B<errorfile> stream with the B<stderr> stream. This can be done by setting the B<-se> parameter, in which case this parameter is ignored. =item B<logfile> The B<logfile> parameter allows the calling program to capture the log stream. This stream is only created if requested with a B<-g> parameter. It contains detailed diagnostic information about a script which may be useful for debugging. =item B<teefile> The B<teefile> parameter allows the calling program to capture the tee stream. This stream is only created if requested with one of the 'tee' parameters, a B<--tee-pod> , B<--tee-block-comments>, B<--tee-side-commnts>, or B<--tee-all-comments>. =item B<debugfile> The B<debugfile> parameter allows the calling program to capture the stream produced by the B<--DEBUG> parameter. This parameter is mainly used for debugging perltidy itself. =item B<argv> If the B<argv> parameter is given, it will be used instead of the B<@ARGV> array. The B<argv> parameter may be a string, a reference to a string, or a reference to an array. If it is a string or reference to a string, it will be parsed into an array of items just as if it were a command line string. =item B<dump_options> If the B<dump_options> parameter is given, it must be the reference to a hash. In this case, the parameters contained in any perltidyrc configuration file will be placed in this hash and perltidy will return immediately. This is equivalent to running perltidy with --dump-options, except that the parameters are returned in a hash rather than dumped to standard output. Also, by default only the parameters in the perltidyrc file are returned, but this can be changed (see the next parameter). This parameter provides a convenient method for external programs to read a perltidyrc file. An example program using this feature, F<perltidyrc_dump.pl>, is included in the distribution. Any combination of the B<dump_> parameters may be used together. =item B<dump_options_type> This parameter is a string which can be used to control the parameters placed in the hash reference supplied by B<dump_options>. The possible values are 'perltidyrc' (default) and 'full'. The 'full' parameter causes both the default options plus any options found in a perltidyrc file to be returned. =item B<dump_getopt_flags> If the B<dump_getopt_flags> parameter is given, it must be the reference to a hash. This hash will receive all of the parameters that perltidy understands and flags that are passed to Getopt::Long. This parameter may be used alone or with the B<dump_options> flag. Perltidy will exit immediately after filling this hash. See the demo program F<perltidyrc_dump.pl> for example usage. =item B<dump_options_category> If the B<dump_options_category> parameter is given, it must be the reference to a hash. This hash will receive a hash with keys equal to all long parameter names and values equal to the title of the corresponding section of the perltidy manual. See the demo program F<perltidyrc_dump.pl> for example usage. =item B<dump_abbreviations> If the B<dump_abbreviations> parameter is given, it must be the reference to a hash. This hash will receive all abbreviations used by Perl::Tidy. See the demo program F<perltidyrc_dump.pl> for example usage. =item B<prefilter> A code reference that will be applied to the source before tidying. It is expected to take the full content as a string in its input, and output the transformed content. =item B<postfilter> A code reference that will be applied to the tidied result before outputting. It is expected to take the full content as a string in its input, and output the transformed content. Note: A convenient way to check the function of your custom prefilter and postfilter code is to use the --notidy option, first with just the prefilter and then with both the prefilter and postfilter. See also the file B<filter_example.pl> in the perltidy distribution. =back =head1 ERROR HANDLING An exit value of 0, 1, or 2 is returned by perltidy to indicate the status of the result. A exit value of 0 indicates that perltidy ran to completion with no error messages. An exit value of 1 indicates that the process had to be terminated early due to errors in the input parameters. This can happen for example if a parameter is misspelled or given an invalid value. The calling program should check for this flag because if it is set the destination stream will be empty or incomplete and should be ignored. Error messages in the B<stderr> stream will indicate the cause of any problem. An exit value of 2 indicates that perltidy ran to completion but there are warning messages in the B<stderr> stream related to parameter errors or conflicts and/or warning messages in the B<errorfile> stream relating to possible syntax errors in the source code being tidied. In the event of a catastrophic error for which recovery is not possible B<perltidy> terminates by making calls to B<croak> or B<confess> to help the programmer localize the problem. These should normally only occur during program development. =head1 NOTES ON FORMATTING PARAMETERS Parameters which control formatting may be passed in several ways: in a F<.perltidyrc> configuration file, in the B<perltidyrc> parameter, and in the B<argv> parameter. If the B<-pbp> style is used it will typically be necessary to also specify a B<-nst> flag. This is necessary to turn off the B<-st> flag contained in the B<-pbp> parameter set which otherwise would direct the output stream to the standard output. =head1 EXAMPLES The following example uses string references to hold the input and output code and error streams, and illustrates checking for errors. use Perl::Tidy; my $source_string = <<'EOT'; my$error=Perl::Tidy::perltidy(argv=>$argv,source=>\$source_string, destination=>\$dest_string,stderr=>\$stderr_string, errorfile=>\$errorfile_string,); EOT my $dest_string; my $stderr_string; my $errorfile_string; my $argv = "-npro"; # Ignore any .perltidyrc at this site $argv .= " -pbp"; # Format according to perl best practices $argv .= " -nst"; # Must turn off -st in case -pbp is specified $argv .= " -se"; # -se appends the errorfile to stderr ## $argv .= " --spell-check"; # uncomment to trigger an error print "<<RAW SOURCE>>\n$source_string\n"; my $error = Perl::Tidy::perltidy( argv => $argv, source => \$source_string, destination => \$dest_string, stderr => \$stderr_string, errorfile => \$errorfile_string, # ignored when -se flag is set ##phasers => 'stun', # uncomment to trigger an error ); if ($error) { # serious error in input parameters, no tidied output print "<<STDERR>>\n$stderr_string\n"; die "Exiting because of serious errors\n"; } if ($dest_string) { print "<<TIDIED SOURCE>>\n$dest_string\n" } if ($stderr_string) { print "<<STDERR>>\n$stderr_string\n" } if ($errorfile_string) { print "<<.ERR file>>\n$errorfile_string\n" } Additional examples are given in examples section of the perltidy distribution. =head1 Using the B<formatter> Callback Object The B<formatter> parameter is an optional callback object which allows the calling program to receive tokenized lines directly from perltidy for further specialized processing. When this parameter is used, the two formatting options which are built into perltidy (beautification or html) are ignored. The following diagram illustrates the logical flow: |-- (normal route) -> code beautification caller->perltidy->|-- (-html flag ) -> create html |-- (formatter given)-> callback to write_line This can be useful for processing perl scripts in some way. The parameter C<$formatter> in the perltidy call, formatter => $formatter, is an object created by the caller with a C<write_line> method which will accept and process tokenized lines, one line per call. Here is a simple example of a C<write_line> which merely prints the line number, the line type (as determined by perltidy), and the text of the line: sub write_line { # This is called from perltidy line-by-line my $self = shift; my $line_of_tokens = shift; my $line_type = $line_of_tokens->{_line_type}; my $input_line_number = $line_of_tokens->{_line_number}; my $input_line = $line_of_tokens->{_line_text}; print "$input_line_number:$line_type:$input_line"; } The complete program, B<perllinetype>, is contained in the examples section of the source distribution. As this example shows, the callback method receives a parameter B<$line_of_tokens>, which is a reference to a hash of other useful information. This example uses these hash entries: $line_of_tokens->{_line_number} - the line number (1,2,...) $line_of_tokens->{_line_text} - the text of the line $line_of_tokens->{_line_type} - the type of the line, one of: SYSTEM - system-specific code before hash-bang line CODE - line of perl code (including comments) POD_START - line starting pod, such as '=head' POD - pod documentation text POD_END - last line of pod section, '=cut' HERE - text of here-document HERE_END - last line of here-doc (target word) FORMAT - format section FORMAT_END - last line of format section, '.' DATA_START - __DATA__ line DATA - unidentified text following __DATA__ END_START - __END__ line END - unidentified text following __END__ ERROR - we are in big trouble, probably not a perl script Most applications will be only interested in lines of type B<CODE>. For another example, let's write a program which checks for one of the so-called I<naughty matching variables> C<&`>, C<$&>, and C<$'>, which can slow down processing. Here is a B<write_line>, from the example program B<find_naughty.pl>, which does that: sub write_line { # This is called back from perltidy line-by-line # We're looking for $`, $&, and $' my ( $self, $line_of_tokens ) = @_; # pull out some stuff we might need my $line_type = $line_of_tokens->{_line_type}; my $input_line_number = $line_of_tokens->{_line_number}; my $input_line = $line_of_tokens->{_line_text}; my $rtoken_type = $line_of_tokens->{_rtoken_type}; my $rtokens = $line_of_tokens->{_rtokens}; chomp $input_line; # skip comments, pod, etc return if ( $line_type ne 'CODE' ); # loop over tokens looking for $`, $&, and $' for ( my $j = 0 ; $j < @$rtoken_type ; $j++ ) { # we only want to examine token types 'i' (identifier) next unless $$rtoken_type[$j] eq 'i'; # pull out the actual token text my $token = $$rtokens[$j]; # and check it if ( $token =~ /^\$[\`\&\']$/ ) { print STDERR "$input_line_number: $token\n"; } } } This example pulls out these tokenization variables from the $line_of_tokens hash reference: $rtoken_type = $line_of_tokens->{_rtoken_type}; $rtokens = $line_of_tokens->{_rtokens}; The variable C<$rtoken_type> is a reference to an array of token type codes, and C<$rtokens> is a reference to a corresponding array of token text. These are obviously only defined for lines of type B<CODE>. Perltidy classifies tokens into types, and has a brief code for each type. You can get a complete list at any time by running perltidy from the command line with perltidy --dump-token-types In the present example, we are only looking for tokens of type B<i> (identifiers), so the for loop skips past all other types. When an identifier is found, its actual text is checked to see if it is one being sought. If so, the above write_line prints the token and its line number. The B<examples> section of the source distribution has some examples of programs which use the B<formatter> option. For help with perltidy's peculiar way of breaking lines into tokens, you might run, from the command line, perltidy -D filename where F<filename> is a short script of interest. This will produce F<filename.DEBUG> with interleaved lines of text and their token types. The B<-D> flag has been in perltidy from the beginning for this purpose. If you want to see the code which creates this file, it is C<sub Perl::Tidy::Debugger::write_debug_entry> =head1 EXPORT &perltidy =head1 INSTALLATION The module 'Perl::Tidy' comes with a binary 'perltidy' which is installed when the module is installed. The module name is case-sensitive. For example, the basic command for installing with cpanm is 'cpanm Perl::Tidy'. =head1 VERSION This man page documents Perl::Tidy version 20240511 =head1 LICENSE This package is free software; you can redistribute it and/or modify it under the terms of the "GNU General Public License". Please refer to the file "COPYING" for details. =head1 BUG REPORTS The source code repository is at L<https://github.com/perltidy/perltidy>. To report a new bug or problem, use the "issues" link on this page. =head1 SEE ALSO The perltidy(1) man page describes all of the features of perltidy. It can be found at http://perltidy.sourceforge.net. =cut
Save File
Cancel