← Back
Editing: ACKNOWLEDGEMENTS.md
The following people have contributed to this project, and their assistance is acknowledged and greatly appreciated: * Antoine Beaupré <anarcat@debian.org> - Debian package maintainer * Kevin Coyner <kcoyner@debian.org> - previous Debian package maintainer * Cédric Delfosse <cedric@debian.org> - previous Debian package maintainer * Jakub Hrozek <jhrozek@redhat.com> - Fedora package maintainer * Eduardo Aguiar <eduardo.oliveira@sondabrasil.com.br> - provided Portuguese (Brazilian) translation * Stéphane Lacasse <stephane@gorfou.ca> - provided French translation * Marcos Kreinacke <public@kreinacke.com> - provided German translation * Bartosz Feński <fenio@o2.pl> <http://skawina.eu.org/> - provided Polish translation along with Krystian Zubel * Joshua Jensen - reported RPM installation bug * Boris Folgmann <http://www.folgmann.com/en/> - reported cursor handling bug * Mathias Gumz - reported NLS bug * Daniel Roethlisberger - submitted patch to use lockfiles for "`-c`" if terminal locking fails * Adam Buchbinder - lots of help with a Cygwin port of "`-c`" * Mark Tomich <http://metuchen.dyndns.org> - suggested "`-B`" option * Gert Menke - reported bug when piping to `dd` with a large input buffer size * Ville Herva <Ville.Herva@iki.fi> - informative bug report about rate limiting performance * Elias Pipping - patch to compile properly on Darwin 9; potential NULL deref report * Patrick Collison - similar patch for OS X * Boris Lohner - reported problem that "`-L`" does not complain if given non-numeric value * Sebastian Kayser - supplied testing for *SIGPIPE*, demonstrated internationalisation problem * Laszlo Ersek <http://phptest11.atw.hu/> - reported shared memory leak on *SIGINT* with "`-c`" * Phil Rutschman <http://bandgap.rsnsoft.com/> - provided a patch for fully restoring terminal state on exit * Henry Precheur <http://henry.precheur.org/> - reporting and suggestions for "`--rate-limit`" bug when rate is under 10 * E. Rosten <http://mi.eng.cam.ac.uk/~er258/> - supplied patch for block buffering in line mode * Kjetil Torgrim Homme - reported compilation error with default *CFLAGS* on non-GCC compilers * Alexandre de Verteuil - reported bug in OS X build and supplied test environment to fix in * Martin Baum - supplied patch to return nonzero exit status if terminated by signal * Sam Nelson <http://www.siliconfuture.net/> - supplied patch to fix trailing slash on *DESTDIR* * Daniel Pape - reported Cygwin installation problem due to *DESTDIR* * Philipp Beckers - ported to the Syabas PopcornHour A-100 series * Henry Gebhard <hsggebhardt@googlemail.com> - supplied patches to improve SI prefixes and add "`--average-rate`" * Vladimir Kokarev, Alexander Leo - reported that exit status did not reflect file errors * Thomas Rachel - submitted patches for IEEE1541 (MiB suffixes), 1+e03 bug * Guillaume Marcais - submitted speedup patch for line mode * Moritz Barsnick - submitted patch for compile warning in size calculation * Pawel Piatek - submitted RPM and patches for AIX * Sami Liedes - submitted patch for "`--timer`" and "`--bytes`" with "`--numeric`" * Steven Willis - reported problem with "`-R`" killing non-PV remote processes * Vladimir Pal, Vladimir Ermakov - submitted patch which led to development of "`--format`" option * Peter Samuelson <peter@p12n.org> - submitted patch to calculate size if stdout is a block device * Miguel Diaz - much Cygwin help (and packaging), found narrow-terminal bug * Jim Salter <http://ubuntuwiki.net> - commissioned work on the "`--skip-errors`" option * Wouter Pronk - reported build problem on SCO * Bryan Dongray <http://www.dongrays.com> - provided patches for test scripts failing on older Red Hats * Zev Weiss <www.bewilderbeest.net> - provided patch to fix `splice()` not using stdin * Zing Shishak - provided patch for "`--null`" / "`-0`" (count null terminated lines) * Jacek Wielemborek <http://deetah.jogger.pl/kategorie/english> - implemented fdwatch in Python, suggested PV port; reported bug with "`-l`" and ETA / size; many other contributions * Kim Krecht - suggested buffer fill status and last bytes output display options * Cristian Ciupitu <http://ciupicri.github.io>, Josh Stone - pointed out file descriptor leak with helpful suggestions (Josh Stone initially noticed the missing close) * Jan Seda - found issue with `splice()` and *SPLICE_F_NONBLOCK* causing slowdown * André Stapf - pointed out formatting problem e.g. 13GB -> 13.1GB which should be shown 13.0GB -> 13.1GB; highlighted on-startup row swapping in "`-c`", and suggested "`--discard`" * Damon Harper <http://www.usrbin.ca/> - suggested "`-D`" / "`--delay-start`" option * Ganaël Laplanche <http://www.martymac.org> - provided patch for `lstat64()` on systems that do not support it * Peter Korsgaard <http://www.buildroot.net/> - provided similar patch for `lstat64()`, specifically for uClibc support; provided AIX cross-compilation patch to fix bug in "`-lc128`" check * Ralf Ramsauer <https://blog.ramses-pyramidenbau.de/> - reported bug which dropped transfer rate on terminal resize * Michiel Van Herwegen - reported and discussed bug with "`-l`" and ETA / size * Erkki Seppälä <http://www.inside.org/~flux/> - provided patch implementing "`-I`" * Eric A. Borisch - provided details of compatibility fix for "`%Lu`" in watchpid code * Jan Venekamp - reported MacOS buffer size interactions with pipes * Matt <https://github.com/lemonsqueeze/pv> - provided "rate-window" patches for rate calculation * [Filippo Valsorda](https://github.com/FiloSottile) - provided patch for stat64 issue on Apple Silicon * Matt Koscica, William Dillon - also reported stat64 issue on Apple Silicon * [Demitri Muna](https://github.com/demitri) - assisted with stat64 patch on Apple Silicon * Norman Rasmussen - suggested "`-c`" with "`-d PID:FD`", reject "`-N`" with "`-d PID`" * Andriy Gapon, Jonathan Elchison - reported bug where "`pv /dev/zero >/dev/null &`" stops immediately * Marcelo Chiesa - reported unused-result warnings when compiling PV 1.6.6 * Jered Floyd - provided patches to improve "`--rate-limit`" * Christoph Biedl - provided ETA and dynamic interval patches * Richard Fonfara - provided German translations for "`pv --help`" * Johannes Gerer <http://johannesgerer.com> - suggested that "`-B`" should enable "`-C`" * Sam James - provided fix for number.c build issue caused by missing stddef.h * Jakub Wilk <jwilk@jwilk.net> - corrected README encoding * Frederik Eaton - reported issue with `<()` shell constructs * [gray](https://github.com/gray) - reported issue with "`--force`" and terminal process groups, and proposed a patch * [Luc Gommans](https://github.com/lgommans) / https://lgms.nl/ - provided a "momentary ETA" patch * [ikasty](https://github.com/ikasty) - added relative filename display to "`--watchfd`" * [Michael Weiß](https://github.com/quitschbo) - corrected behaviour when not attached to a terminal * [christoph-zededa](https://github.com/christoph-zededa) - provided OS X support for "`--watchfd`" * [Dave Beckett](https://github.com/dajobe) - added "`@filename`" syntax to "`--size`", and corrected an autoconf problem with stat64 on OS X * [Volodymyr Bychkovyak](https://github.com/vbychkoviak) - provided fix for rate limit behaviour with bursty traffic * [Nick Black](https://nick-black.com) - added "`--bits`" option * [Andrew Schulman](https://github.com/andrew-schulman) - provided reproducible example of terminal size detection issue in 1.7.17/1.7.18 * [fuschia74](https://github.com/fuchsia74) - provided "`--enable-static`" patch for "`configure`" * [Wilhelm von Thiele](https://github.com/TurtleWilly) - assisted with OS X cleanups ([#73](https://codeberg.org/a-j-wood/pv/issues/73), [#74](https://codeberg.org/a-j-wood/pv/issues/74)) * Matějů Miroslav, Ing. - suggested fix for ETA and elapsed time faults when suspending and resuming a machine ([#13](https://codeberg.org/a-j-wood/pv/issues/13)) * Anthony DeRobertis - suggested the "`--error-skip-block`" option ([#37](https://codeberg.org/a-j-wood/pv/issues/37)) * Benoit Pierre - provided patches for compilation without IPC support, without HAVE_STRUCT_STAT_ST_BLKSIZE, and on MacOS * [gustav-b](https://codeberg.org/gustav-b) - suggested percentage formatting correction ([#80](https://codeberg.org/a-j-wood/pv/issues/80)) * [Thomas Bertels](https://codeberg.org/tbertels) - updated French translations ([#83](https://codeberg.org/a-j-wood/pv/pulls/83)) * [kevinruddy](https://codeberg.org/kevinruddy) - added decimal units option ([#85](https://codeberg.org/a-j-wood/pv/pulls/85)) * [xmort](https://codeberg.org/xmort) - added "`--output`" option ([#90](https://codeberg.org/a-j-wood/pv/pulls/90)) * [bogiord](https://codeberg.org/bogiord) - reported the loss of output block device size detection in 1.8.10, and suggested the fix ([#91](https://codeberg.org/a-j-wood/pv/issues/91)) * [eborisch](https://codeberg.org/eborisch) - provided fix for misbehaviour when used with "`zfs send`" due to treating zero sized writes (generally due to timer interruption) as end of file ([#92](https://codeberg.org/a-j-wood/pv/pulls/92), [#93](https://codeberg.org/a-j-wood/pv/pulls/93)) * [alexanderperlis](https://codeberg.org/alexanderperlis) - provided initial support for block devices with "`--size @FILE`" ([#94](https://codeberg.org/a-j-wood/pv/pulls/94)) * [jettero](https://codeberg.org/jettero) - reported double-free coredump when using "`--watchfd`" after 1.8.10 ([#96](https://codeberg.org/a-j-wood/pv/issues/96)) ---
Save File
Cancel