← Back
Editing: Authentication.Policy.txt
Authentication policy support ============================= Dovecot supports (v2.2.25+) external authentication policy server. This server can be used to decide whether the connecting user is permitted, tarpitted or outright rejected. While dovecot can do tarpitting and refusal on its own, this adds support for making cluster-wide decisions to make it easier to deter and defeat bruteforce attacks. Known issues ------------ Prior v2.2.27 request policy was mostly broken. Prior v2.2.34, the request attributes contained *orig_username* which was not correct in all cases, especially with master login. Prior v2.3.5.2 / 2.2.36.3, invalid UTF-8 would crash auth server if auth policy is used. Configuration ------------- The auth-policy server is a core feature and does not require plugin(s) to work. To activate this feature, you need to configure it. * *auth_policy_server_url*: URL of the policy server, url is appended with ?command=allow/report unless it ends with '&', at which just command=allow/report is added. * /Default/: None (*REQUIRED* configuration) * Example: 'auth_policy_server_url = http://example.com:4001/' * *auth_policy_server_api_header*: Header and value to add to request (for API authentication) * /Default/: None (No authentication is done) * See https://en.wikipedia.org/wiki/Basic_access_authentication#Client_side * Example: 'Authorization: Basic <base64-encoded value>' * *auth_policy_server_timeout_msecs*: Request timeout in milliseconds * /Default/: 'auth_policy_server_timeout_msecs = 2000' * *auth_policy_hash_mech*: Hash mechanism to use for password, you can use any hash mechanism supported by Dovecot (md4,md5,sha1,sha256,sha512) * /Default/: 'auth_policy_hash_mech = sha256' * *auth_policy_hash_nonce*: Cluster-wide nonce to add to hash * /Default/: None (*REQUIRED* configuration) * Example: 'auth_policy_hash_nonce = localized_random_string' * *auth_policy_request_attributes*: Request attributes specification (see attributes section below) * /Default/: 'auth_policy_request_attributes = login=%{requested_username} pwhash=%{hashed_password} remote=%{rip} device_id=%{client_id} protocol=%s' * *auth_policy_reject_on_fail*: If policy request fails for some reason should users be rejected * /Default/: 'auth_policy_reject_on_fail = no' * *auth_policy_hash_truncate*: How many *bits* to use from password hash. * /Default/: 'auth_policy_hash_truncate = 12' * *auth_policy_check_before_auth*: Whether to do policy lookup before authentication is started * /Default/: 'auth_policy_check_before_auth = yes' * *auth_policy_check_after_auth*: Whether to do policy lookup after authentication is completed * /Default/: 'auth_policy_check_after_auth = yes' * *auth_policy_report_after_auth*: Whether to report authentication result * /Default/: 'auth_policy_report_after_auth = yes' Required Minimum Configuration ------------------------------ ---%<------------------------------------------------------------------------- auth_policy_server_url = http://example.com:4001/ auth_policy_hash_nonce = localized_random_string #auth_policy_server_api_header = Authorization: Basic <base64-encoded value> #auth_policy_server_timeout_msecs = 2000 #auth_policy_hash_mech = sha256 #auth_policy_request_attributes = login=%{requested_username} pwhash=%{hashed_password} remote=%{rip} device_id=%{client_id} protocol=%s #auth_policy_reject_on_fail = no #auth_policy_hash_truncate = 12 #auth_policy_check_before_auth = yes #auth_policy_check_after_auth = yes #auth_policy_report_after_auth = yes ---%<------------------------------------------------------------------------- Password hash algorithm ----------------------- To generate the hash, you concatenate nonce, login name, nil byte, password and run it through the hash algorithm once. The hash is truncated when truncation is set to non-zero. The hash is truncated by first choosing bits from MSB to byte boundary (rounding up), then right-shifting the remainding bits. ---%<------------------------------------------------------------------------- hash = H(nonce||user||'\x00'||password) bytes = round8(bits*8) hash = HEX(hash[0:bytes] >> (bytes-bits*8)) ---%<------------------------------------------------------------------------- Request attributes ------------------ Auth policy server requests are JSON requests. The JSON format can be specified with auth_policy_request_attributes. The syntax is key=value pairs, and key can contain one or more / to designate that a JSON object should be made. For example: ---%<------------------------------------------------------------------------- login=%{orig_username} pwhash=%{hashed_password} remote=%{real_rip} ---%<------------------------------------------------------------------------- produces ---%<------------------------------------------------------------------------- {"login":"john.doe","pwhash":"1234","remote":"127.0.0.1"} ---%<------------------------------------------------------------------------- And ---%<------------------------------------------------------------------------- login=%{orig_username} pwhash=%{hashed_password} remote=%{real_rip} attrs/cos=%{userdb:cos} ---%<------------------------------------------------------------------------- produces ---%<------------------------------------------------------------------------- {"login":"john.doe","pwhash":"1234","remote":"127.0.0.1", "attrs":{"cos":"premium"}} ---%<------------------------------------------------------------------------- Since v2.2.29/v2.3 you can include IMAP ID command result in auth policy requests, this is achieved with using %{client_id}, which will expand to IMAP ID command arglist. You must set ---%<------------------------------------------------------------------------- imap_id_retain=yes ---%<------------------------------------------------------------------------- for this to work. Default values for auth_policy_request_attributes ------------------------------------------------- Since v2.2.25 ---%<------------------------------------------------------------------------- login=%{orig_username} pwhash=%{hashed_password} remote=%{real_rip} ---%<------------------------------------------------------------------------- Since v2.2.30 ---%<------------------------------------------------------------------------- login=%{orig_username} pwhash=%{hashed_password} remote=%{real_rip} device_id=%{client_id} protocol=%s ---%<------------------------------------------------------------------------- Since v2.2.34 ---%<------------------------------------------------------------------------- login=%{requested_username} pwhash=%{hashed_password} remote=%{rip} device_id=%{client_id} protocol=%s ---%<------------------------------------------------------------------------- Since v2.3.0 (note that 2.2 and 2.3 branches have been developed in parallel for a while) ---%<------------------------------------------------------------------------- login=%{orig_username} pwhash=%{hashed_password} remote=%{real_rip} device_id=%{client_id} protocol=%s ---%<------------------------------------------------------------------------- Since v2.3.1 ---%<------------------------------------------------------------------------- login=%{requested_username} pwhash=%{hashed_password} remote=%{rip} device_id=%{client_id} protocol=%s ---%<------------------------------------------------------------------------- Since v2.3.2 the request contains 'tls' attribute when TLS has been used. TLS is also detected if it's offloaded by a load balancer that can provide this information using HAProxy v2 protocol to dovecot. Response -------- ---%<------------------------------------------------------------------------- {"status":-1,"msg":"go away"} ---%<------------------------------------------------------------------------- 'status' values: see below Mode of operation ----------------- Auth policy check: Authentication ''before'' userdb/passdb ---------------------------------------------------------- First query is done *before* password and user databases are consulted. This means that any userdb/passdb attributes are left empty. The command used here is 'allow' and will appear on the URL as command=allow. 'status' result values: * *-1*: Reject * *0*: Accept * *(Any other positive value)*: Tarpit for this number of seconds. Auth policy check: Authentication ''after'' successful userdb/passdb lookup --------------------------------------------------------------------------- Second lookup is done *after* authentication succeeds. The command used here is 'allow' and will appear on the URL as command=allow. 'status' result values: * *-1*: Authentication fail * *>= 0*: Authentication succeed Auth policy check: Reporting after authentication succeeds ---------------------------------------------------------- A report request is sent at end of authentication. The command used here is 'report' and will appear on the URL as command=report. The JSON request is sent with two additional attributes: * *success*: boolean true/false depending on whether the overall authentication succeeded * *policy_reject*: boolean true/false whether the failure was due to policy server 'status' result value is ignored. External Auth Policy Servers ---------------------------- * http://oxpedia.org/wiki/index.php?title=AppSuite:Dovecot_Antiabuse_Shield (This file was created from the wiki on 2019-06-19 12:42)
Save File
Cancel