File Manager - BorneoXploit

Editing: cockpit-certificate-helper

#!/usr/bin/bash
# SPDX-License-Identifier: LGPL-2.1-or-later

set -eu

# shellcheck disable=SC2034 # prefix= is set because the default /etc contains "${prefix}"
prefix="/usr"
COCKPIT_CONFIG="/etc/cockpit"
COCKPIT_WS_CERTS_D="${COCKPIT_CONFIG}/ws-certs.d"
COCKPIT_RUNTIME_DIR="/run/cockpit"

install_cert() {
    local destination="${COCKPIT_WS_CERTS_D}/$1"
    mv -Z "$1" "${destination}"

# The certificate should be world-readable
    chmod a+r "${destination}"

# Force flush to disk for embedded devices
    sync "${destination}"
}

install_key() {
    local destination="${COCKPIT_WS_CERTS_D}/$1"
    mv -Z "$1" "${destination}"

# Force flush to disk for embedded devices
    sync "${destination}"
}

selfsign_sscg() {
    sscg --quiet \
        --lifetime "${DAYS}" \
        --cert-key-file "${KEYFILE}" \
        --cert-file "${CERTFILE}" \
        --ca-file "${CA_FILE}" \
        --hostname "${HOSTNAME}" \
        --organization "${MACHINE_ID:-unspecified}" \
        --subject-alt-name localhost \
        --subject-alt-name IP:127.0.0.1/255.255.255.255
}

selfsign_openssl() {
    openssl req -x509 \
        -days "${DAYS}" \
        -newkey rsa \
        -keyout "${KEYFILE}" \
        -keyform PEM \
        -nodes \
        -out "${CERTFILE}" \
        -outform PEM \
        -subj "${MACHINE_ID:+/O=${MACHINE_ID}}/CN=${HOSTNAME}" \
        -addext "subjectAltName=IP:127.0.0.1,DNS:localhost" \
        -addext "basicConstraints = critical,CA:TRUE" \
        -addext "keyUsage = critical,digitalSignature,cRLSign,keyCertSign,keyEncipherment,keyAgreement" \
        -addext "extendedKeyUsage = serverAuth"
}

cmd_selfsign() {
    # Common variables used by both methods
    local MACHINE_ID
    if [ -e /etc/machine-id ]; then
        MACHINE_ID="$(tr -d -c '[:xdigit:]' < /etc/machine-id)"
    fi
    local HOSTNAME="${HOSTNAME:-$(hostname)}"
    local CERTFILE="0-self-signed.cert"
    local KEYFILE="0-self-signed.key"
    local CA_FILE="0-self-signed-ca.pem"

# do not stomp over a partial key -- the admin tried to do something wrong
    if [ -e "${COCKPIT_WS_CERTS_D}/${KEYFILE}" ] && [ ! -e "${COCKPIT_WS_CERTS_D}/${CERTFILE}" ]; then
        echo "Error: Found $KEYFILE but no $CERTFILE. Please remove the key file first." >&2
        exit 1
    fi

mkdir -pZ "$COCKPIT_WS_CERTS_D"

# We renew certificates up to 30 days before expiry, so give ourselves a
    # year, plus 30 days.  The maximum is variously mentioned to be 397 or 398.
    local DAYS=395

# If sscg fails, try openssl
    selfsign_sscg || selfsign_openssl

# Install the files and set permissions ($CA_FILE is only created by sscg)
    test ! -e "${CA_FILE}" || install_cert "${CA_FILE}"
    install_cert "${CERTFILE}"
    install_key "${KEYFILE}"
}

cmd_ipa_request() {
    local USER="$1"

# IPA operations require auth; read password from stdin to avoid quoting issues
    # if kinit fails, we can't handle this setup, exit cleanly
    kinit "${USER}@${REALM}" || exit 0

# ensure this gets run with a non-C locale; ipa fails otherwise
    if [ "$(sh -c 'eval `locale`; echo $LC_CTYPE')" = 'C' ]; then
        export LC_CTYPE=C.UTF-8
    fi

# create a kerberos Service Principal Name for cockpit-ws, unless already present
    ipa service-show "${SERVICE}" || \
        ipa service-add --ok-as-delegate=true --ok-to-auth-as-delegate=true --force "${SERVICE}"

# add cockpit-ws key, unless already present
    klist -k "${KEYTAB}" | grep -qF "${SERVICE}" || \
        ipa-getkeytab -p "HTTP/${HOST}" -k "${KEYTAB}"

# request the certificate and put it into our certificate directory, so that auto-refresh works
    mkdir -pZ "$COCKPIT_WS_CERTS_D"
    ipa-getcert request -f "${COCKPIT_WS_CERTS_D}/10-ipa.cert" -k "${COCKPIT_WS_CERTS_D}/10-ipa.key" -K "HTTP/${HOST}" -m 640 -o root:root -M 644 -w -v
}

cmd_ipa_cleanup() {
    # clean up keytab
    if [ -e "${KEYTAB}" ]; then
        ipa-rmkeytab -k "${KEYTAB}" -p "${SERVICE}"
    fi

# clean up certificate; support both "copy" and "direct" modes from cmd_ipa_request()
    if [ -e "${COCKPIT_WS_CERTS_D}/10-ipa.key" ]; then
        rm "${COCKPIT_WS_CERTS_D}/10-ipa.cert" "${COCKPIT_WS_CERTS_D}/10-ipa.key"
        ipa-getcert stop-tracking -f "${COCKPIT_WS_CERTS_D}/10-ipa.cert" -k "${COCKPIT_WS_CERTS_D}/10-ipa.key" || \
            ipa-getcert stop-tracking -f /run/cockpit/certificate-helper/10-ipa.cert -k /run/cockpit/certificate-helper/10-ipa.key
    fi
}

cmd_ipa() {
    local REALM="$2"

local HOST
    HOST="$(hostname -f)"
    local SERVICE="HTTP/${HOST}@${REALM}"
    local KEYTAB="${COCKPIT_CONFIG}/krb5.keytab"

# use a temporary keytab to avoid interfering with the system one
    export KRB5CCNAME=/run/cockpit/keytab-setup

# not an IPA setup? cannot handle this
    if [ -z "$(which ipa)" ]; then
        echo 'ipa must be installed for this command'
        exit 1
    fi

case "$1" in
        request)
            cmd_ipa_request "$3"
            ;;
        cleanup)
            cmd_ipa_cleanup
            ;;
        *)
            echo 'unknown subcommand'
            exit 1
            ;;
    esac
}

main() {
    # ipa-getkeytab needs root to create the file, same for cert installation
    if [ "$(id -u)" != "0" ]; then
        echo 'must be run as root'
        exit 1
    fi

# Create a private working directory
    mkdir -p "${COCKPIT_RUNTIME_DIR}"
    WORKDIR="${COCKPIT_RUNTIME_DIR}/certificate-helper"
    mkdir -m 700 "${WORKDIR}" # we expect that not to have existed
    trap 'exit' INT QUIT PIPE TERM
    trap 'rm -rf "${WORKDIR}"' EXIT
    cd "${WORKDIR}"

# Dispatch subcommand
    case "$1" in
        selfsign)
            cmd_selfsign
            ;;
        ipa)
            shift
            cmd_ipa "$@"
            ;;
        *)
            echo 'unknown subcommand'
            exit 1
            ;;
    esac
}

main "$@"

Cancel